Bring it to the nearest branch or call
- Vilnius Kareivių g. 11A +370 655 77057
- Kaunas Savanorių pr. 155 +370 639 69600
- Klaipėda Sausio 15-osios g. 13 +370 647 07741
- Šiauliai Gegužių g. 30 +370 682 29052
All branches are open Mon–Fri 9:00–18:00
A rotary hammer most often fails when work has already begun: it stops hammering and only rotates, sparks, or smells of burning insulation. On this page you will find what is most commonly faulty, what you can safely check yourself, and how repairs are carried out at our branches.
We repair rotary hammers from Bosch, Makita, DeWalt, Hilti, Metabo and other manufacturers, whether used by home DIYers or construction professionals. For the repair of other construction tools, see a separate page.
Most common rotary hammer faults
Below are the symptoms with which rotary hammers are most often brought in, and the likely causes. The exact cause becomes clear only after the tool has been inspected.
The rotary hammer does not hammer, it only rotates
A worn impact mechanism, dried-out grease, worn bearings or bushings.
What you can check yourself: Check that the hammer mode is selected and that the drill bit is properly inserted. Do not open the housing.
We diagnose the mechanism, replace worn parts and re-lubricate it.
The rotary hammer does not rotate, it only hammers
A faulty rotation mode switch, a worn gear or gearbox parts.
What you can check yourself: With the tool switched off, change the mode several times and try again. If this does not help, do not use force.
We check the switching mechanism and the gearbox, and replace faulty parts.
Sparks or smells of burning
Worn carbon brushes, a dirty commutator or an overloaded motor.
What you can check yourself: Unplug it immediately and let the tool cool down. Do not use it any further.
We replace the brushes and assess the condition of the commutator and motor.
The rotary hammer does not switch on
A damaged power cord or plug, a faulty switch, worn brushes.
What you can check yourself: Try a different socket and inspect the cord and plug. For a cordless model, check that the battery is charged and the contacts are clean.
We replace the cord, switch or other faulty parts.
Strong vibration or noise
Worn bearings, damaged gears, a worn chuck.
What you can check yourself: Try it with a different, straight drill bit. If the vibration persists, do not use the tool.
We replace bearings and damaged gearbox parts, and check the chuck.
The rotary hammer overheats quickly
Blocked ventilation openings, worn bearings, poor lubrication, excessive load.
What you can check yourself: Clean the dust off the ventilation openings and let the tool rest.
We clean the tool, inspect the motor and gearbox, and renew the lubricant.
Which rotary hammers we repair and what to bring
The rotary hammers we most often receive are Bosch, Makita, DeWalt, Hilti and Metabo. If your tool is from another manufacturer, that is not an obstacle – it is worth checking with your branch.
Bring the rotary hammer itself, and for a cordless model, also the charger and battery. Your purchase receipt or warranty card is useful if the tool is still covered by the store warranty.
- The rotary hammer – a drill bit is not required for diagnostics.
- Charger and battery – for cordless models.
- Purchase documents, if the tool is still under warranty.
If the tool has started to spark or give off a burning smell, unplug it immediately and do not switch it on again until a technician has examined it.

Why rotary hammers break down
Several components work at the same time in a rotary hammer: the motor with its carbon brush assembly, the gearbox, the impact mechanism and the chuck. Dust, overheating and excessive pressure on the drill bit wear all of them out.
The brushes and bearings usually wear out first, while dried-out or contaminated lubricant speeds up wear of the gearbox and impact mechanism. That is why an early repair is often cheaper than a fault that drags on.
What you can check yourself and what you should not do
Before bringing in the tool, check the simple things: whether the socket works, whether the cable and plug are undamaged, whether the correct mode is selected, and whether the drill bit moves freely in the chuck. For a cordless model, wipe the battery contacts with a dry cloth.
Do not open the housing or take the battery apart. Inside there are electrical parts and tightly tensioned mechanical components, so dismantling it yourself can result in injuries or additional damage.
If you have already tried to take the tool apart, tell the technician – this speeds up diagnostics.
A used or rented rotary hammer: what to look out for
When looking for a used rotary hammer in classified ads or renting a tool, check at least a few things. Switch it on and listen for any squeaking, whether the mode changes smoothly, and whether the drill bit wobbles in the chuck.
Inspect the cable, plug and ventilation openings: burn marks or a broken cable indicate previous overloading. Before buying, ask how much and for what kind of work the tool has been used.
How to extend the service life of a rotary hammer
Do not force the tool – the impact mechanism does the work on its own. Use drill bits suited to the material and the chuck type, and let the tool rest after long use.
After work, clean the dust from the ventilation openings and the chuck, and store the tool in a dry place. If it starts to vibrate more strongly, hammers poorly or gets hot, do not wait for a complete breakdown.
Branches and opening hours
You can bring rotary hammers to our branches in Vilnius, Kaunas, Klaipėda and Šiauliai. All branches are open Monday to Friday from 9:00 to 18:00 and closed at weekends.
You will find addresses and phone numbers on the “Kontaktai” page, and you can read other customers’ experiences in the reviews.
How rotary hammer repair works
- You bring the tool to a branch. Choose the Vilnius, Kaunas, Klaipėda or Šiauliai branch and come on a working day between 9:00 and 18:00. Bring the rotary hammer, and for a cordless one, also the charger.
- Diagnostics. We inspect the tool and determine which component has failed: the brushes, bearings, gearbox, impact mechanism or electrical parts.
- Repair price. After diagnostics, we determine the repair price. The decision whether to repair is yours.
- Repair and warranty. We replace the faulty parts, lubricate and test the tool. We provide a warranty for the completed repair.
Frequently asked questions about rotary hammer repair
How much does rotary hammer repair cost?
The price depends on the fault and the model, so we cannot state it in advance. We will inspect the tool, assess the fault and determine the repair price.
Do you repair Bosch, Makita, DeWalt, Hilti and Metabo rotary hammers?
Yes, we repair tools from these manufacturers. If your model is from another manufacturer, please ask at your branch.
The rotary hammer rotates but does not hammer – what could it be?
Most often the cause is a worn impact mechanism, dried-out lubricant in the gearbox or worn bearings. Diagnostics will determine the exact cause.
Do you provide a warranty for the completed repair?
Yes, we provide a warranty for the completed repair.
Can I replace the carbon brushes myself?
On some models this is simple, but you need to open the housing and disconnect the electrical components. If you are not sure, it is safer to leave it to a technician.
When are the branches open?
The Vilnius, Kaunas, Klaipėda and Šiauliai branches are open Mon–Fri 9:00–18:00 and closed on weekends.