Repair of Corded and Cordless Power Tools

We repair rotary hammers, drills, angle grinders, saws and screwdrivers in Vilnius, Kaunas, Klaipėda and Šiauliai. Repair work is covered by a 2-month warranty, and diagnostics cost €10.

Statybos įrankių remontas dirbtuvėse: perforatorius ir kampinis šlifuoklis ant darbo stalo
from €15
Screwdriver repair
€10
Tool diagnostics
2 months
Warranty on repair work
Mon–Fri 9–18
Branch opening hours

Bring it to the nearest branch or call

All branches are open Mon–Fri 9:00–18:00

Power tool repair is needed when a rotary hammer stops hammering, an angle grinder smokes, or a cordless screwdriver only works occasionally. We repair corded and cordless power tools from Makita, Bosch, DeWalt, Metabo, Hilti, Milwaukee and other manufacturers. If you specifically need a rotary hammer repaired, see our separate rotary hammer repair page.

Taisykla7 (UAB „Net septyni“) has been repairing electronics and home appliances since 2007. Below you will find a price list, the most common faults, tips on whether to repair or buy new, and a simple overview of the repair process. All branches are open Mon–Fri 9:00–18:00 and closed at weekends.

Power tool repair price list

Prices are starting prices; the final amount is determined after diagnostics.

ServicePriceWarranty
Tool fault diagnostics10 €–
Repair of welding machines and semi-automatic welders (overheating, not working, not welding, voltage fluctuations, power not adjustable and similar mechanical or electrical faults)from €352 mo.
Inverter repair (not working, green light does not come on, yellow light on, smoke, not welding, cannot hold load and similar faults)from €352 mo.
Repair of rotary hammers and demolition hammers (will not switch on, not hammering, unstable chuck, reduced speed, smoke, lack of power, carbon brushes need replacing, etc.)from €252 mo.
Angle grinder repair (not spinning, carbon brushes need replacing, humming, wobbling disc, vibration, broken parts, etc.)from €252 mo.
Router repair (seized, will not switch on, motor overheating, etc.)from €252 mo.
Repair of screwdrivers and impact drivers (not turning, turning only sometimes, lights on but not working, head slipping, sparking, burning smell, etc.)from €152 mo.
Repair of drill presses, drills and power drills (works only in hammer mode, will not switch on, drill bit falls out, loss of power, sparking, burning smell, chuck will not loosen, turns in one direction only, etc.)from €202 mo.
Repair of cutting tools, circular saws, jigsaws, tile and paving stone cutters, and reciprocating saws (starts cutting and stops, disc does not turn, motor failure, smoke, leaking water pump, vibrates when touched, will not switch on, etc.)from €202 mo.
Tool defect report for an insurance company (costs covered by the insurer under the contract)30 €–
A 2-month warranty applies to repair work as specified in the price list. The warranty does not apply to diagnostics or defect reports.

Most common power tool faults

Below are the symptoms people most often bring tools in for, and what you can safely do.

Rotary hammer runs but does not hammer

Most often caused by a worn hammering mechanism, a clogged or worn chuck, or sometimes a faulty hammer mode switch.

What you can check yourself: Check that hammer mode is switched on and that the chisel holder is not clogged with dust. Do not disassemble the tool.

Diagnostics and replacement of worn mechanism parts. Rotary hammer repair – from €25.

Tool will not switch on

Damaged cable or plug, faulty switch, worn carbon brushes, motor or control board failure.

What you can check yourself: Try a different socket and inspect the cable and plug. For a cordless tool, try a charged battery.

Diagnostics of the electrical part, switch or carbon brush replacement, motor repair. The price depends on the type of tool.

Angle grinder hums, vibrates or smokes

Often the cause is worn bearings, worn carbon brushes, a loose disc mount or a burnt rotor winding.

What you can check yourself: Switch off the tool, let it cool down and check that the disc is properly tightened and undamaged. If you notice a burning smell, do not switch it on again.

Replacement of bearings, carbon brushes or other parts. Angle grinder repair – from €25.

Saw starts cutting and then stops

Overheated or worn motor, worn carbon brushes, mechanical failure in the gearbox, jammed cutting mechanism.

What you can check yourself: Check that the cutting section is not clogged with shavings or dust and that the power cable is undamaged.

Diagnostics, motor or gearbox repair. Cutting tool repair – from €20.

Cordless screwdriver only turns occasionally

Poor contact with the battery, faulty switch or control electronics, worn gearbox.

What you can check yourself: Clean the external contacts with a dry cloth and check that the battery locks firmly in place. Do not open the battery.

Diagnostics and replacement of the faulty part. Screwdriver repair – from €15.

Drill does not hold the drill bit or does not rotate in both directions

Worn or damaged chuck, faulty direction switch, mechanical gearbox failure.

What you can check yourself: Check that the drill bit is suitable for the chuck and that the direction switch is set all the way.

Chuck or switch replacement, gearbox repair. Drill repair – from €20.

Which construction tools we repair

Most of our work involves hand-held power tools used by both construction workers and home DIYers. The exact list is provided below, and you will find the prices in the price list.

  • rotary hammers and demolition hammers
  • drills, hammer drills and drill presses
  • angle grinders
  • circular saws, jigsaws and chainsaws, tile and paving stone cutters, reciprocating saws
  • screwdrivers and impact drivers
  • routers, sanders and polishers
  • other corded and cordless construction tools

If the tool is battery-powered, bring it together with the battery and charger – this makes it easier to identify the fault.

Technician repairs an electric construction tool
Closeup of a construction worker wearing hard hat and safety vest inspecting a machine used in the installation of electrical system in a building under construction. The image highlights the concentration of the worker and the industrial environment, with tools and wires visible in the background, reflecting safety and precision in technical work – stock photo

Rotary hammer repair: what most often fails

A rotary hammer works in the toughest conditions: dust, impacts and heavy load. That is why the carbon brushes, chuck, hammering mechanism and motor are the parts that wear out most often.

In the price list, repair of rotary hammers and demolition hammers starts from €25. The final price depends on which parts are needed and how much work is involved.

Saw repair: electric, chain and petrol

We repair circular saws, jigsaws, chainsaws, and tile and paving stone cutters according to the cutting tool price list line – from €20. The most common faults: the saw starts cutting and then stops, the disc does not rotate, the motor runs but the cutting part stands still, or smoke appears.

If you have a petrol saw, please call the nearest branch before bringing it in and ask whether we can accept your model. We have not listed this type of tool separately in the price list, so it is better to check in advance.

Welding machines and inverters

This is a separate section of the price list, not ordinary construction tools. Repair of welding machines and semi-automatic welders starts from €35, and inverters also from €35, with a 2-month warranty for both. You can find more information on the page welding machine repair.

Repair or buy a new tool

The general rule is simple: if the repair cost is significantly lower than the price of a similar new tool, and the housing and motor are in good condition, repairing it usually pays off. Cheap tools with a heavily worn housing or a damaged motor are sometimes not as worthwhile to repair.

The cause of the fault and the actual repair cost are determined by diagnostics, which cost €10. We assess the tool’s condition within 1–2 business days, and then you can decide.

The sooner you noticed the fault and stopped working, the lower the chance of damaging other parts.

What you can check yourself and what you must not do

Before bringing in the tool, you may only perform an external check. Do not disassemble the tool or touch its interior, electrical parts or battery – this is dangerous and may cause damage.

What is worth inspecting:

  • whether the power cord and plug are undamaged, and whether another socket works
  • whether the switch is not broken or stuck
  • whether the battery is charged and locks in firmly
  • whether the chisel or drill holder is not clogged with dust
  • whether there is no burning smell coming from the ventilation openings

If you smell burning or see smoke, disconnect the tool from the power supply immediately and do not plug it in again.

Fault report for insurance

If the tool is insured, we can issue a tool fault report (defect report) for the insurance company. It costs €30, and the warranty does not apply to this service. Whether the insurance company covers the repair costs depends on the terms of your contract, so find out its requirements in advance.

Branches and opening hours

You can bring the tool to our branches in Vilnius, Kaunas, Klaipėda and Šiauliai. All branches are open Monday to Friday 9:00–18:00 and closed on weekends. You will find addresses and phone numbers on the Contacts page, and other customers’ opinions in the Reviews section.

How tool repair works

  1. Bring the tool to a branch. Choose a branch in Vilnius, Kaunas, Klaipėda or Šiauliai. We work Mon–Fri 9:00–18:00. Bring a cordless tool together with its battery and charger.
  2. Describe the fault. Tell us when the tool stopped working and what you noticed: a smell, smoke, an unusual sound or sparks.
  3. Diagnostics. We carry out fault detection for €10. We assess the tool’s condition within 1–2 business days, so you will know the cause of the fault and can decide whether the repair is worthwhile.
  4. Repair. With your consent, we repair the tool. Repair work is covered by a 2-month warranty, as stated in the price list.
  5. Collect the tool. Collect the repaired tool at the same branch. If the tool is insured, you can request a fault report for the insurance company.

Frequently asked questions about power tool repair

How much does power tool repair cost?

The price depends on the type of tool. Screwdriver repairs start from €15, drill repairs from €20, cutting tool repairs from €20, and rotary hammer and angle grinder repairs from €25. Diagnostics cost €10.

Is a warranty provided for repairs?

The price list specifies a 2-month warranty for repair work. The warranty does not apply to diagnostics or the fault report.

How long do diagnostics take?

We assess the tool’s condition within 1–2 business days. The repair time depends on the fault and whether parts need to be replaced.

Do you repair petrol saws?

Our list clearly specifies electric and cordless tools, including chainsaws. For a petrol saw, please call the branch and check before bringing it in.

Can I repair the tool myself?

You may perform an external check: inspect the cord, switch and battery. We do not recommend opening an electric tool or battery, as it is dangerous.

Do you issue a report for the insurance company?

Yes, a tool fault report costs €30. Whether the insurance covers the costs is decided by the insurance company according to your contract.